posixoptions
Prev  Section 7  Next

Name

posixoptions — optional parts of the POSIX standard

DESCRIPTION

The POSIX standard (the information below is from POSIX.1-2001) describes a set of behaviors and interfaces for a compliant system. However, many interfaces are optional and there are feature test macros to test the availability of interfaces at compile time, and functions sysconf(3), fpathconf(3), pathconf(3), confstr(3) to do this at run time. From shell scripts one can use getconf(1). For more detail, see sysconf(3).

We give the name of the POSIX abbreviation, the option, the name of the sysconf() parameter used to inquire about the option, and possibly a very short description. Much more precise detail can be found in the POSIX standard itself, versions of which can nowadays be accessed freely on the web.

ADV - _POSIX_ADVISORY_INFO - _SC_ADVISORY_INFO

The following advisory functions are present:

posix_fadvise(),
posix_fallocate(),
posix_memalign(),
posix_madvise().

AIO - _POSIX_ASYNCHRONOUS_IO - _SC_ASYNCHRONOUS_IO

The header <aio.h> is present. The following functions are present:

aio_cancel(),
aio_error(),
aio_fsync(),
aio_read(),
aio_return(),
aio_suspend(),
aio_write(),
lio_listio().

BAR - _POSIX_BARRIERS - _SC_BARRIERS

This option implies the _POSIX_THREADS and _POSIX_THREAD_SAFE_FUNCTIONS options. The following functions are present:

pthread_barrier_destroy(),
pthread_barrier_init(),
pthread_barrier_wait(),
pthread_barrierattr_destroy(),
pthread_barrierattr_init().

--- - POSIX_CHOWN_RESTRICTED

If this option is in effect (as it always is under POSIX.1-2001) then only root may change the owner of a file, and non-root can only set the group of a file to one of the groups it belongs to. This affects the functions chown(), fchown().

CS - _POSIX_CLOCK_SELECTION - _SC_CLOCK_SELECTION

This option implies the _POSIX_TIMERS option. The following functions are present:

pthread_condattr_getclock(),
pthread_condattr_setclock(),
clock_nanosleep().

If CLOCK_REALTIME is changed by the function clock_settime(), then this affects all timers set for an absolute time.

CPT - _POSIX_CPUTIME - _SC_CPUTIME

The clockID CLOCK_PROCESS_CPUTIME_ID is supported. The initial value of this clock is 0 for each process. This option implies the _POSIX_TIMERS option. The function clock_getcpuclockid() is present.

--- - _POSIX_FILE_LOCKING - _SC_FILE_LOCKING

This option has been deleted. Not in final XPG6.

FSC - _POSIX_FSYNC - _SC_FSYNC

The function fsync() is present.

IP6 - _POSIX_IPV6 - _SC_IPV6

Internet Protocol Version 6 is supported.

--- - _POSIX_JOB_CONTROL - _SC_JOB_CONTROL

If this option is in effect (as it always is under POSIX.1-2001) then the system implements POSIX-style job control, and the following functions are present:

setpgid(),
tcdrain(),
tcflush(),
tcgetpgrp(),
tcsendbreak(),
tcsetattr(),
tcsetpgrp().

MF - _POSIX_MAPPED_FILES - _SC_MAPPED_FILES

Shared memory is supported. The include file <sys/mman.h> is present. The following functions are present: mmap(), msync(), munmap().

ML - _POSIX_MEMLOCK - _SC_MEMLOCK

Shared memory can be locked into core. The functions mlockall(), munlockall() are present.

MR/MLR - _POSIX_MEMLOCK_RANGE - _SC_MEMLOCK_RANGE

More precisely, ranges can be locked into core. The functions mlock(), munlock() are present.

MPR - _POSIX_MEMORY_PROTECTION - _SC_MEMORY_PROTECTION

The function mprotect() is present.

MSG - _POSIX_MESSAGE_PASSING - _SC_MESSAGE_PASSING

The include file <mqueue.h> is present. The following functions are present:

mq_close(),
mq_getattr(),
mq_notify(),
mq_open(),
mq_receive(),
mq_send(),
mq_setattr(),
mq_unlink().

MON - _POSIX_MONOTONIC_CLOCK - _SC_MONOTONIC_CLOCK

CLOCK_MONOTONIC is supported. This option implies the _POSIX_TIMERS option. Affected functions are

aio_suspend(),
clock_getres(),
clock_gettime(),
clock_settime(),
timer_create().

--- - _POSIX_MULTI_PROCESS - _SC_MULTI_PROCESS

This option has been deleted. Not in final XPG6.

--- - _POSIX_NO_TRUNC

If this option is in effect (as it always is under POSIX.1-2001) then pathname components longer than NAME_MAX are not truncated, but give an error. This property may be dependent on the path prefix of the component.

PIO - _POSIX_PRIORITIZED_IO - _SC_PRIORITIZED_IO

This option says that one can specify priorities for asynchronous I/O. This affects the functions

aio_read(),
aio_write().

PS - _POSIX_PRIORITY_SCHEDULING - _SC_PRIORITY_SCHEDULING

The include file <sched.h> is present. The following functions are present:

sched_get_priority_max(),
sched_get_priority_min(),
sched_getparam(),
sched_getscheduler(),
sched_rr_get_interval(),
sched_setparam(),
sched_setscheduler(),
sched_yield().

If also _POSIX_SPAWN is in effect, then the following functions are present:

posix_spawnattr_getschedparam(),
posix_spawnattr_getschedpolicy(),
posix_spawnattr_setschedparam(),
posix_spawnattr_setschedpolicy().

RS - _POSIX_RAW_SOCKETS

Raw sockets are supported. Affected functions are getsockopt(), setsockopt().

--- - _POSIX_READER_WRITER_LOCKS - _SC_READER_WRITER_LOCKS

This option implies the _POSIX_THREADS option. Conversely, under POSIX.1-2001 the _POSIX_THREADS option implies this option.

The following functions are present:
    
pthread_rwlock_destroy(),
pthread_rwlock_init(),
pthread_rwlock_rdlock(),
pthread_rwlock_tryrdlock(),
pthread_rwlock_trywrlock(),
pthread_rwlock_unlock(),
pthread_rwlock_wrlock(),
pthread_rwlockattr_destroy(),
pthread_rwlockattr_init().

RTS - _POSIX_REALTIME_SIGNALS - _SC_REALTIME_SIGNALS

Realtime signals are supported. The following functions are present:

sigqueue(),
sigtimedwait(),
sigwaitinfo().

--- - _POSIX_REGEXP - _SC_REGEXP

If this option is in effect (as it always is under POSIX.1-2001) then POSIX regular expressions are supported and the following functions are present:

regcomp(),
regerror(),
regexec(),
regfree().

--- - _POSIX_SAVED_IDS - _SC_SAVED_IDS

If this option is in effect (as it always is under POSIX.1-2001) then a process has a saved set-user-ID and a saved set-group-ID. Affected functions are

exec(),
kill(),
seteuid(),
setegid(),
setgid(),
setuid().

SEM - _POSIX_SEMAPHORES - _SC_SEMAPHORES

The include file <semaphore.h> is present. The following functions are present:

sem_close(),
sem_destroy(),
sem_getvalue(),
sem_init(),
sem_open(),
sem_post(),
sem_trywait(),
sem_unlink(),
sem_wait().

SHM - _POSIX_SHARED_MEMORY_OBJECTS - _SC_SHARED_MEMORY_OBJECTS

The following functions are present:

mmap(),
munmap(),
shm_open(),
shm_unlink().

--- - _POSIX_SHELL - _SC_SHELL

If this option is in effect (as it always is under POSIX.1-2001), the function system() is present.

SPN - _POSIX_SPAWN - _SC_SPAWN

This option describes support for process creation in a context where it is difficult or impossible to use fork(), for example, because no MMU is present. If _POSIX_SPAWN is in effect, then the include file <spawn.h> and the following functions are present:

posix_spawn(),
posix_spawn_file_actions_addclose(),
posix_spawn_file_actions_adddup2(),
posix_spawn_file_actions_addopen(),
posix_spawn_file_actions_destroy(),
posix_spawn_file_actions_init(),
posix_spawnattr_destroy(),
posix_spawnattr_getsigdefault(),
posix_spawnattr_getflags(),
posix_spawnattr_getpgroup(),
posix_spawnattr_getsigmask(),
posix_spawnattr_init(),
posix_spawnattr_setsigdefault(),
posix_spawnattr_setflags(),
posix_spawnattr_setpgroup(),
posix_spawnattr_setsigmask(),
posix_spawnp().

If also _POSIX_PRIORITY_SCHEDULING is in effect, then the following functions are present:

posix_spawnattr_getschedparam(),
posix_spawnattr_getschedpolicy(),
posix_spawnattr_setschedparam(),
posix_spawnattr_setschedpolicy().

SPI - _POSIX_SPIN_LOCKS - _SC_SPIN_LOCKS

This option implies the _POSIX_THREADS and _POSIX_THREAD_SAFE_FUNCTIONS options. The following functions are present:

pthread_spin_destroy(),
pthread_spin_init(),
pthread_spin_lock(),
pthread_spin_trylock(),
pthread_spin_unlock().

SS - _POSIX_SPORADIC_SERVER - _SC_SPORADIC_SERVER

The scheduling policy SCHED_SPORADIC is supported. This option implies the _POSIX_PRIORITY_SCHEDULING option. Affected functions are

sched_setparam(),
sched_setscheduler().

SIO - _POSIX_SYNCHRONIZED_IO - _SC_SYNCHRONIZED_IO

Affected functions are open(), msync(), fsync(), fdatasync().

TSA - _POSIX_THREAD_ATTR_STACKADDR - _SC_THREAD_ATTR_STACKADDR

Affected functions are

pthread_attr_getstack(),
pthread_attr_getstackaddr(),
pthread_attr_setstack(),
pthread_attr_setstackaddr().

TSS - _POSIX_THREAD_ATTR_STACKSIZE - _SC_THREAD_ATTR_STACKSIZE

Affected functions are

pthread_attr_getstack(),
pthread_attr_getstacksize(),
pthread_attr_setstack(),
pthread_attr_setstacksize().

TCT - _POSIX_THREAD_CPUTIME - _SC_THREAD_CPUTIME

The clockID CLOCK_THREAD_CPUTIME_ID is supported. This option implies the _POSIX_TIMERS option. Affected functions are

pthread_getcpuclockid(),
clock_getres(),
clock_gettime(),
clock_settime(),
timer_create().

TPI - _POSIX_THREAD_PRIO_INHERIT - _SC_THREAD_PRIO_INHERIT

Affected functions are

pthread_mutexattr_getprotocol(),
pthread_mutexattr_setprotocol().

TPP - _POSIX_THREAD_PRIO_PROTECT - _SC_THREAD_PRIO_PROTECT

Affected functions are

pthread_mutex_getprioceiling(),
pthread_mutex_setprioceiling(),
pthread_mutexattr_getprioceiling(),
pthread_mutexattr_getprotocol(),
pthread_mutexattr_setprioceiling(),
pthread_mutexattr_setprotocol().

TPS - _POSIX_THREAD_PRIORITY_SCHEDULING - _SC_THREAD_PRIORITY_SCHEDULING

If this option is in effect, the different threads inside a process can run with different priorities and/or different schedulers. Affected functions are

pthread_attr_getinheritsched(),
pthread_attr_getschedpolicy(),
pthread_attr_getscope(),
pthread_attr_setinheritsched(),
pthread_attr_setschedpolicy(),
pthread_attr_setscope(),
pthread_getschedparam(),
pthread_setschedparam(),
pthread_setschedprio().

TSH - _POSIX_THREAD_PROCESS_SHARED - _SC_THREAD_PROCESS_SHARED

Affected functions are

pthread_barrierattr_getpshared(),
pthread_barrierattr_setpshared(),
pthread_condattr_getpshared(),
pthread_condattr_setpshared(),
pthread_mutexattr_getpshared(),
pthread_mutexattr_setpshared(),
pthread_rwlockattr_getpshared(),
pthread_rwlockattr_setpshared().

TSF - _POSIX_THREAD_SAFE_FUNCTIONS - _SC_THREAD_SAFE_FUNCTIONS

Affected functions are

readdir_r(),
getgrgid_r(),
getgrnam_r(),
getpwnam_r(),
getpwuid_r(),
flockfile(),
ftrylockfile(),
funlockfile(),
getc_unlocked(),
getchar_unlocked(),
putc_unlocked(),
putchar_unlocked(),
rand_r(),
strerror_r(),
strtok_r(),
asctime_r(),
ctime_r(),
gmtime_r(),
localtime_r().

TSP - _POSIX_THREAD_SPORADIC_SERVER - _SC_THREAD_SPORADIC_SERVER

This option implies the _POSIX_THREAD_PRIORITY_SCHEDULING option. Affected functions are

sched_getparam(),
sched_setparam(),
sched_setscheduler().

THR - _POSIX_THREADS - _SC_THREADS

Basic support for POSIX threads is available. The following functions are present:

pthread_atfork(),
pthread_attr_destroy(),
pthread_attr_getdetachstate(),
pthread_attr_getschedparam(),
pthread_attr_init(),
pthread_attr_setdetachstate(),
pthread_attr_setschedparam(),
pthread_cancel(),
pthread_cleanup_push(),
pthread_cleanup_pop(),
pthread_cond_broadcast(),
pthread_cond_destroy(),
pthread_cond_init(),
pthread_cond_signal(),
pthread_cond_timedwait(),
pthread_cond_wait(),
pthread_condattr_destroy(),
pthread_condattr_init(),
pthread_create(),
pthread_detach(),
pthread_equal(),
pthread_exit(),
pthread_getspecific(),
pthread_join(),
pthread_key_create(),
pthread_key_delete(),
pthread_mutex_destroy(),
pthread_mutex_init(),
pthread_mutex_lock(),
pthread_mutex_trylock(),
pthread_mutex_unlock(),
pthread_mutexattr_destroy(),
pthread_mutexattr_init(),
pthread_once(),
pthread_rwlock_destroy(),
pthread_rwlock_init(),
pthread_rwlock_rdlock(),
pthread_rwlock_tryrdlock(),
pthread_rwlock_trywrlock(),
pthread_rwlock_unlock(),
pthread_rwlock_wrlock(),
pthread_rwlockattr_destroy(),
pthread_rwlockattr_init(),
pthread_self(),
pthread_setcancelstate(),
pthread_setcanceltype(),
pthread_setspecific(),
pthread_testcancel().

TMO - _POSIX_TIMEOUTS - _SC_TIMEOUTS

The following functions are present:

mq_timedreceive(),
mq_timedsend(),
pthread_mutex_timedlock(),
pthread_rwlock_timedrdlock(),
pthread_rwlock_timedwrlock(),
sem_timedwait(),
posix_trace_timedgetnext_event().

TMR - _POSIX_TIMERS - _SC_TIMERS

The following functions are present:

clock_getres(),
clock_gettime(),
clock_settime(),
nanosleep(),
timer_create(),
timer_delete(),
timer_gettime(),
timer_getoverrun(),
timer_settime().

TRC - _POSIX_TRACE - _SC_TRACE

POSIX tracing is available. The following functions are present:

posix_trace_attr_destroy(),
posix_trace_attr_getclockres(),
posix_trace_attr_getcreatetime(),
posix_trace_attr_getgenversion(),
posix_trace_attr_getmaxdatasize(),
posix_trace_attr_getmaxsystemeventsize(),
posix_trace_attr_getmaxusereventsize(),
posix_trace_attr_getname(),
posix_trace_attr_getstreamfullpolicy(),
posix_trace_attr_getstreamsize(),
posix_trace_attr_init(),
posix_trace_attr_setmaxdatasize(),
posix_trace_attr_setname(),
posix_trace_attr_setstreamsize(),
posix_trace_attr_setstreamfullpolicy(),
posix_trace_clear(),
posix_trace_create(),
posix_trace_event(),
posix_trace_eventid_equal(),
posix_trace_eventid_get_name(),
posix_trace_eventid_open(),
posix_trace_eventtypelist_getnext_id(),
posix_trace_eventtypelist_rewind(),
posix_trace_flush(),
posix_trace_get_attr(),
posix_trace_get_status(),
posix_trace_getnext_event(),
posix_trace_shutdown(),
posix_trace_start(),
posix_trace_stop(),
posix_trace_trygetnext_event().

TEF - _POSIX_TRACE_EVENT_FILTER - _SC_TRACE_EVENT_FILTER

This option implies the _POSIX_TRACE option. The following functions are present:

posix_trace_eventset_add(),
posix_trace_eventset_del(),
posix_trace_eventset_empty(),
posix_trace_eventset_fill(),
posix_trace_eventset_ismember(),
posix_trace_get_filter(),
posix_trace_set_filter(),
posix_trace_trid_eventid_open().

TRI - _POSIX_TRACE_INHERIT - _SC_TRACE_INHERIT

Tracing children of the traced process is supported. This option implies the _POSIX_TRACE option. The following functions are present:

posix_trace_attr_getinherited(),
posix_trace_attr_setinherited().

TRL - _POSIX_TRACE_LOG - _SC_TRACE_LOG

This option implies the _POSIX_TRACE option. The following functions are present:

posix_trace_attr_getlogfullpolicy(),
posix_trace_attr_getlogsize(),
posix_trace_attr_setlogfullpolicy(),
posix_trace_attr_setlogsize(),
posix_trace_close(),
posix_trace_create_withlog(),
posix_trace_open(),
posix_trace_rewind().

TYM - _POSIX_TYPED_MEMORY_OBJECTS - _SC_TYPED_MEMORY_OBJECT

The following functions are present:

posix_mem_offset(),
posix_typed_mem_get_info(),
posix_typed_mem_open().

--- - _POSIX_VDISABLE

Always present (probably 0). Value to set a changeable special control character to indicate that it is disabled.

XOPEN EXTENSIONS

_XOPEN_CRYPT, _XOPEN_LEGACY, _XOPEN_REALTIME, _XOPEN_REALTIME_THREADS, _XOPEN_UNIX.

SEE ALSO

sysconf(3), standards(7)

COLOPHON

This page is part of release 2.79 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/.


  Copyright (c) 2003 Andries Brouwer (aebcwi.nl)

This is free documentation; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of
the License, or (at your option) any later version.

The GNU General Public License's references to "object code"
and "executables" are to be interpreted as the output of any
document formatting or typesetting system, including
intermediate and printed output.

This manual is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public
License along with this manual; if not, write to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111,
USA.
Prev  Up  Next
pipe  Home  pthreads